Peek-A-Flame

The Peek-A-Flame Relay Series 7000 is a sensor module that activates a relay when a flame is detected by an ultraviolet sensor or a flame rod. The Peek-A-Flame is for flame detection only; it will not detect safe start, safety lockout, load switching or any other safety procedures.

  • UL recognized, CSA certified, & FM approved.
  • Plugs into an Industry Standard 11-pin base.
  • Test point at the front permits direct reading of the flame signal level, 0-12 VDC.
  • "Flame On" Light
  • "Flame Fail" Light indicates Test condition and can be activated remotely. By applying 12-120 VAC or VDC to Pin #10. Contacts are also activated between Pin #5 and Pin #6. A test signal is ouput on Pin #11.
  • Analog output on Pin #11 for remote monitoring by a PLC or similar device.

    •
    Data Sheet
    Series 7000 (Apr. 09)

     

    For Archive Documents Click Here


    If you don't see the technical document that you need listed, contact techdocs@peconet.com
    and we will try to locate it in our archives.
    arrowdlf.gif (2614 bytes) Back to Previous Page

    [Brochures] [Products] [Hot Stuff] [Services] [Contact] [Related Links] [Tech Bulletins]

    ©2011 Power Equipment Company
    2011 Williamsburg Road Richmond, VA 23231
    804-236-3800 Fax 804-236-3882
    sales@peconet.com
    SITE MAP
    Terms & Conditions